Non-water-based fabric protectant: Let Unicorn SPiT dry. Apply protectant. Allow to dry as indicated on the product. Let set for 24 hours before washing.

Once the surface has been adequately sanded, use a rag to wipe away any dust or debris. Next, apply a thin layer of Unicorn Spit directly to the wood using either a brush or a roller. Allow the glaze to dry for at least three hours before adding additional coats as desired. No matter what you’re staining, starting with a clean, dry, and smooth surface is important. Then, when working with wood, sand down rough spots and wipe away any dust before proceeding, this is very important if you want your stain to look its best. Otherwise, the finish will be uneven. Step 2: Choose Your Stain Color Once you have your desired color, you can apply it to any surface. Wood, glass, metal, ceramic, and fabric are all great surfaces for Unicorn Spit. Just ensure the surface is clean and free of grease or dirt before starting. How Long Does It Take Unicorn Spit to Dry? NOTE: If a more washed-out look is desired: Let dyed fabric dry for 24 hours (without using any colorfast method). Then, machine wash on gentle cycle with cold water. Machine dry if desired. A protectant method can be used if no further color loss is desired. It is recommended that you keep dyed fabric using Unicorn SPiT separate from other clothing until the project has been made colorfast. Configuring Dilution Ratios: To choose the dilution rate that fits your needs, first test a small area using the same material as your project. To seal your Unicorn Spit project, apply one or two coats of sealer with a brush or roller. Let the sealer dry completely before using or handling your project.

INSTRUCTIONS

Allure® Dimensional Design Adhesive Paint: Mix Unicorn SPiT with Allure Gloss (Shiny Clear) in a 1:1 ratio. Dry flat 5 hours. Washable after 72 hours. Dilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn SPiT in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved. Use Unicorn SPiT right out of the bottle for a paint application or dilute it up to 10% with water for antiquing or dry brushing. Diluting Unicorn SPiT with water allows you to control the opaqueness. For antiquing or dry brushing, add 10 parts Unicorn SPiT in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 1 part water until the desired effect is achieved. If you’re working with bare wood or a light-colored surface, you may want to apply a base coat of paint before proceeding with the gel stain. This will help ensure coverage and prevent the final color from being too light. Also, this is very important if you work with a light-colored Unicorn Spit Gel Stain. Step 4: Pour Out Some Stain

Use Unicorn SPiT as a tinting agent to add brilliant color (or Unicorn SPiT SPARKLING for color AND sparkle) to epoxy projects. Famowood Glaze Coat High Gloss Finish or Famowood Glaze Coat High Gloss CRAFT Resin is recommended. For all other brands, test before use.What is Unicorn Spit? In its simplest form, Unicorn Spit is paint, a glaze, and a gel stain all in one. This all-in-one product allows artists, hobbyists, crafters, and DIYers alike to turn everyday objects into artistic masterpieces! Whether you are a beginner or a pro, you will have lots of fun with Unicorn Spit, and Unicorn Spit is safe for all ages. It's never too early or too late to find your artistic bone. Unicorn Spit comes in six vivid colors stated as follows: If multiple colors are desired, gather smaller containers to work with in advance. Then measure, mix and pour Glaze Coat epoxy immediately into smaller containers and add Unicorn SPiT. NOTE: If a more washed-out look is desired: Let set for 24 hours before washing. Machine wash in gentle cycle with cold water. Machine dry if desired.

Allow the Unicorn Spit to dry completely before sealing with a topcoat. This will help protect the stain and ensure that it lasts many years. Do You Need to Seal Unicorn Spit? After you’ve applied the sealer, let your project cure for 24 hours before using it or putting it on display. This will give the sealer time to set and dry thoroughly. Otherwise, you risk damaging the finish.

TIP for Blending: Try to stop with too much blending it will smear the colors together and can loose the look. I had multiple foam brushes on hand to switch too if the spit gets too muddy looking. Can use your fingers too --washes off with shampoo. You could also try giving it a cheeky dirt pour and see what effects you can create on your woodturning. To use the dirty pour technique just add Floetrol Undoubtedly, Unicorn Spit is for artistic minded creators and professional creators - people who can take an ordinary item, like an old piece of furniture, and transform it into a palette. With Unicorn Spit, you'll be able to transform everyday items into decorative pieces for your home. In fact, you could transform entire rooms throughout your interior with different combinations of colors, along with the usage of epoxies that you may also obtain right here at MichelleNicoles.com. From a fun arts and crafts project to a real life business that employees 7 people full time, Unicorn SPiT has become a family of loving, caring people who all have a like mind and love to help others. The mission for the company remains the same and that is hope, creativity, and healing.