Joined in 2023 
82 
63 About this deal
As you’re painting, keep an eye out for drips and runs and use your brush to remove them. Apply the second coat of paint Now with all the necessary protection in place it is time to paint your skirting boards. Plan ahead to make sure that you can get the first coat done in one go and then look to choose the best gloss paint if looking for a high sheen finish. How Can I Protect Carpet When Painting Skirting Boards? You can leave painter’s tape on for a few weeks if you have a big project on or don’t have the time to finish in one go. But, ideally you want to be removing the painters tape when the paint becomes touch dry. The longer you leave the tape on the more chance there is of pulling up paint and getting a poor edge. Once you have all the necessary masking/painters' tape in place, lay down any dust sheets or carpet protection before you start painting. On the other hand, if yours is an older home, you may be better opting for a more ornate profile. "Decorative profiles including traditional ogee, ovolo, lambs tongue and torus designs work well in period settings," says Rebecca.
Skirting Board Tape, Double-Sided, Strong Adhesive Tape, 50 m Skirting Board Tape, Double-Sided, Strong Adhesive Tape, 50 m
When it comes to brands, you're spoilt for choice. Here are some products that come highly recommended for skirting board paint:Don’t forget to clean your paintbrushes properly and store them (and the rest of your gear) safely in preparation for your next painting and decorating job. Tools needed for painting skirting boards If your paint is water-based, opt for a synthetic bristled brush, as natural bristles can sometimes soak up too much for the paint and will leave a streaky look. When you’ve finished sanding, use a cloth to wipe away any excess dust. Protect yourself by wearing a dust mask when sanding. PaintWell increased its Industrial Paints offering with the acquisition of Promain UK Limited, the preferred UK distributor for many of the world’s leading paint and surface coatings manufacturers. Use Painter's Tape for Clean Edges: For crisp, clean edges, use painter's tape along the top edge of the skirting board. Remove the tape before the final coat dries to prevent peeling.
Flexible Skirting Board - Self Adhesive Angle Trim
A contemporary colour means this tall ogee skirting design is a fresh addition to the period room. (Image credit: Annie Sloan) What is the Best Type of Skirting Board? Do You Paint Walls or Skirting First? It's generally recommended to paint the walls first and then move on to the skirting boards. This allows for easier touch-ups and ensures that any paint splatters on the skirting boards can be easily covered later. When painting skirting boards, long, confident brush strokes are best. I always start by cutting in at the top of the skirting board (where it meets the wall), a few centimetres from the corner.
Like any DIY, prep is key - so make sure you have cleaned your skirting boards and hoovered the carpet,’ says Emma. Do I Need to Rub Down Skirting Boards Before Painting? Yes, it's advisable to rub down your skirting boards before painting. Sanding helps to create a smooth surface for the paint to adhere to and also removes any existing paint or varnish, which can affect the new coat. Use fine-grit sandpaper and always sand in the direction of the wood grain to avoid scratches. Brands like Dulux, Dulux Trade, Crown Trade, Leyland Trade, and Johnstones Trade offer a range of options to suit different needs and preferences. Paint shields are handy tools that let you place a surface between your brush and the wall while you paint the skirting board. I’ve never tried one of these and I consider myself to have a steady hand, so I use painter’s tape or take the risk. Assuming you’re working in an occupied and carpeted property, the first thing you want to do is move all the furniture away from the skirting board(s). If the room’s big enough, move it to the centre of the room. If it’s not, move the furniture out of the room.
Great Deal 
New Comment